Saturday, February 27, 2021

Picking up where I left off...

Back in the 70's, a lot of young rocketeers were members of the Estes Aerospace Club (EAC - see this post for more details). There were a couple of EAC specific kits (the Viper and Pegasus), a newsletter, a membership certificate, and - best of all - an iron-on EAC logo. As you advanced through the EAC, you received various colored "thrust bar" iron-ons, which you added to your T-shirt. This shirt became your badge of rank, and the rocketeers in my neighborhood wore theirs to every launch, showing off their rocketry prowess. You were ok if you had the blue thrust bar. Magenta wearers were scoffed at, and those with just the basic gold were ridiculed. I personally wore the green - the red was unattainable, as Camrocs, Cinerocs, and Transrocs were well beyond the means afforded to me by my allowance.

Estes Aerospace Club levels and requirements (Click to enlarge).

The EAC faded away as the many years passed; then, back in 2004, I discovered that the National Association of Rocketry had something called NARTREK, in which you advanced levels similar to the old EAC (except Estes kits were not required). NARTREK intrigued me... First, there was the name - nothing with 'Trek' in it could be bad - and second, it had been around for a very long time, since 1978. I wondered how I could have not known about it, given that it was prominently featured in Model Rocketeers of the late 70's. I guess I was so wrapped up in college, I neglected to properly read my rocket magazines. If I had, I would have known not only of the program's existence, but that the NARTREK name was not just NAR joined with last half of Star Trek, designed to appeal to us nerds. It actually stands for something, as you can see from the logo:


Well, ok, so there's a little Star Trek mixed in...

The NARTREK creators also did not like the program being compared to the EAC. NARTREK, they said, was designed to help NAR members advance their rocketry skills, preparing them to design safe rockets and to compete in competitions; it was not a gimmick to get young rocketeers to buy more kits. In the words of Chas Russell, the first honcho of NARTREK:

Model Rocketeer, December 1978, page 7 (Click to enlarge).

"ROCKET ON!" How could I not want to be part of a program like that?

And so I obtained my Bronze and Silver packs, and began my voyage through NARTREK. Bronze level was super easy - all you had to do was:
  • Make a 60-second parachute duration flight with a kit.
  • Make a 30-second streamer duration flight with a kit.
  • Fly a 2 stage kit.
  • Fly a kit with a D or larger motor.
Did all the flights in a single launch, filled out the forms, attached the 4x6 color glossy photos printed on my spiffy ink jet, and mailed the materials to NARTREK Base (ok, so there's a little more Star Trek). My Bronze certificate soon arrived, along with little bronze NARTREK logo decals to put on my rockets (badges of honor, I suppose).

My Bronze certificate (Click to enlarge).

I started Silver immediately - did the boost glider flight in February 2005 using an Estes Dragonfly (which was a very nice glider, BTW) and followed through with a cluster flight the following weekend (3 B6-4s in my Semroc Goliath). I was rolling!

Dragonfly on the pad before its NARTREK Silver flight (Click to enlarge).

Semroc Goliath stuffed with 3 B6-4s for a NARTREK Silver flight (Click to enlarge).

And then I just stopped...

Don't remember why - probably got sidetracked into some other part of rocketry (TARC maybe?). Anyway, I did not do the other 2 Silver flights (payload and scale) - NARTREK simply went out of my mind and stayed gone until this week, when I ran across my NARTREK packet in a pile of some old rocket papers. I had recently seen some posts on YORF about other rocketeers wanting to finish NARTREK, so I got to thinking that I ought to do the same. But 16 years had gone by - would I be allowed to pick up where I left off, or would I have to start back at the beginning? So I emailed George Scheil, the current NARTREK coordinator. He responded quickly and let me know I could pick up right where I left off, as if it were yesterday. He also informed me that I still had to mail in the paper forms with the photos.

I can't remember the last time I printed photos - probably back in 2004 for my NARTREK Bronze. Talk about nostalgia!

So I have added NARTREK Silver and Gold to my goals for 2021. Time to finish what was started many years ago. I have even located some old 4x6 sheets of glossy photo paper.

NARTREK - something every rocketeer ought to do, even if it takes them forever. Check it out here!

6 comments:

  1. I was never in EAC, but I qualify for blue, so I'm glad I'm "ok." :-) I have an EAC graphic I made with my appropriate thrust bars.

    I can't quite match your NARTREK hiatus, but I'm close. My Bronze was awarded in 2010, and I had three of the Silver flights done by 2012. But the Scale model has kicked my butt for nearly a decade, despite me doing the easiest model there is. I also took a five-year break from rocketry in general.

    Weather permitting, I mean to finish Silver by early April (my rocket birthday) and Gold by Memorial Day. My Gold project is already designed and parts are in hand.

    ReplyDelete
    Replies
    1. Can I ask what your scale subject is? I'm curious as to the "easiest model there is" :)

      Delete
    2. Well. I did find out there is an easier model ... it's mostly plastic and pre-printed details ... ridiculous.

      No, I've shackled myself to the inevitable IQSY Tomahawk. This is the rocket recommended as a "first" scale project in the Handbook of Model Rocketry. And then, back when, I bought the NAR Scale Data pack for it as well. I call it easiest because it's 4FNC, a very simple paint treatment, not much work on the fin shapes, and only a small amount of fine detail.

      I started a Semroc 1:10 in 2010 and warped the fins beyond repair. Then I started another Semroc 1:10 last year and failed the tube joinery. So now I'm on the ASP Rocketry 1:16.7 mini model. No disasters so far, though I will have to print my own detail stickers.

      Delete
  2. I did try to use the Estes Mini Honest John for NARTREK Silver Scale. Fins are a little trickier, but paint is easier. Decals I got by with. And I flew it! But I forgot to put wadding in ... so the chute was half-melted. It recovered safely, but I couldn't call that a proper success.

    ReplyDelete
  3. I actually printed off the silver packet a couple of months ago. You've inspired me to figure out where I put it. ;-)

    ReplyDelete